2008 dodge avenger owners manual download
Looking for:
2008 dodge avenger owners manual download |
Dodge Avenger Service Repair Manuals & PDF Download.Dodge 2008 Avenger Owner's Manual
Use of Cookies Contact us. Online Viewer. Manual Description These lights are mounted between the sun visors above the rear view mirror. Each light is turned ON by pressing the button.
Press the button a second time to turn the light OFF. The lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle. They will not turn off automatically.
Interior lighting also comes on when a door is opened or the dimmer control is turned fully upward, past the second detent. The Multi-Function Control Lever controls the operation of the headlights, parking lights, turn signals, headlight beam selection, instrument panel light dimming, interior lights, the passing lights, and fog lights. The lever is located on the left side of the steering column.
Turn the end of the Multi-Function Control Lever to the first detent for parking light operation. Turn to the second detent for headlight operation. There is also a feature that delays turning off the vehicle lights for 30, 60, or 90 seconds after the ignition switch is turned OFF. Only the headlights will illuminate during this time. By continuing to browse the site, you agree to our use of cookies. Learn more.
2008 dodge avenger owners manual download.2008 Dodge Avenger Service Repair Manuals on Online Auto Repair
The Multi-Function Control Lever controls the operation of the headlights, parking lights, turn signals, headlight beam selection, instrument panel light dimming, interior lights, the passing lights, and fog lights. The lever is located on the left side of the steering column. Turn the end of the Multi-Function Control Lever to the first detent for parking light operation.
Turn to the second detent for headlight operation. There is also a feature that delays turning off the vehicle lights for 30, 60, or 90 seconds after the ignition switch is turned OFF. Only the headlights will illuminate during this time. By continuing to browse the site, you agree to our use of cookies.
Learn more. Similar to this Canadian law, some U. The sunroof will open fully, then stop automatically. During this opera- tion, any release of the sunroof switch will stop the sunroof. However, the sunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is open. Both of the outlets are protected by a fuse.
The instrument panel power outlet, located below the climate control knobs, has power available only when the ignition is on. This outlet will also operate a conventional cigar lighter unit. For vehicles equipped with the heated and cooled cupholder, locate the cup holder ash receiver in the Two cupholders can accommodate large sized fast food beverage contain- ers, and 20 oz ml bottles.
A one-piece cup holder insert for both cavities can easily be removed for clean- ing. Page Video Console - If Equipped 1. The left latch opens to the top storage area. The lower bin can be accessed directly, without first exposing the upper bin, by operating the right latch with the armrest down. The first storage bin can be used to hold smaller items. Make sure the beverage container can withstand the temperatures shown above, when using the Cooled or Heated Cup Holder.
If containers of hot liquid are placed in the bottle holder, they can spill when the door is closed, burn- ing the occupants. Be careful when closing the doors to avoid injury. Put heavier objects as low and as far forward as possible. The cooler bin is also equipped with a soft molded liner that is removable for easy cleaning. Inside the bin is a vent which, when opened, allows either air conditioned or fresh air to flow into the storage bin.
Fuel Gauge When the ignition switch is in the ON position, the pointer will show the level of fuel remaining in the fuel tank. Page 5. Low Fuel Light When the fuel level drops to 2 gallons, the fuel symbol will light and a single chime will sound. Charging System Light This light shows the status of the electrical charg- ing system.
The light should come on briefly when the ignition is first turned on and remain on briefly as a bulb check. If the bulb does not come on during starting, have the system checked by an authorized dealer.
If the light comes on and remains on while driving, stop the vehicle and shut off the engine. Page The two trip odometers show individual trip mileage. To switch from odometer to trip odometers, press and release the Trip Odometer button.
To reset a trip odom- eter, display the desired trip odometer to be reset then push and hold the button until the display resets ap- proximately 2 seconds.
To turn off the message temporarily, press and release the Trip Odometer button on the instrument cluster. Turn Signal Indicators The arrows will flash in unison with the exterior turn signal, when using the turn signal lever. Page Accordingly, when the low tire pressure telltale illumi- nates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure.
The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Page could lead to immediate loss of power or severe catalytic converter damage. The vehicle should be serviced as soon as possible if this occurs.
This light will come on when the ignition key is turned to the ON position and may stay on for as long as four seconds. Failure of either half of the dual brake system is indicated by the Brake Warning Light which will turn on when the brake fluid level in the master cylinder has dropped below a specified level.
If the light does not illuminate, have the light inspected by an authorized dealer. The light also will turn on when the parking brake is applied with the ignition switch in the ON position. NOTE: This light shows only that the parking brake is applied. It is located in the lower left part of the cluster below the fuel and engine tem- perature gauges. The Oil Change Required message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval.
To reset all resettable functions, press and release the RESET button a second time within three seconds of resetting the currently displayed function Reset ALL will display during this three second window. The compass will now function normally. Turn the ignition switch to the ON position. Leave the selector lever in PARK. Like any system, however, automo- tive radios have performance limitations, due to mobile operation and natural phenomena, which might lead you to believe your sound system is malfunctioning.
Opening a vehicle front door will cancel this feature. Electronic Volume Control The electronic volume control turns continuously degrees in either direction without stopping. The Music Type function only operates when in the FM mode. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory.
Page begin to play when you insert the disc. The display will show the disc number, the track number, and index time in minutes and seconds. Play will begin at the start of track 1. When reading discs recorded using formats other than ISO Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor MP3 exten- sion as MP3 files. MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Page Menu Language — If Equipped Selecting this item will allow the user to choose the default startup DVD menu language effective only if language supported by disc.
If you want to select a language not listed, then scroll down and select other. Page Operation Instructions Every time a preset button is used, a corresponding button number will display. The use of other sized discs may damage the CD player mechanism. The RW Rewind button works in a similar manner. Discs created with an option such as keep disc open after writing are most likely multisession discs. ID3 version 2 is not supported by the radios. Playlist files are not supported.
MP3 Pro files are not supported. The time of day will display for five seconds. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Macrovision This product incorporates copyright protection technol- ogy that is protected by U. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision. This means rear seat passengers can watch a DVD on the optional rear seat entertainment system, while the driver and front-seat passenger listen to the radio.
Other special features include direct tune, music type selections, easy store presets, backup camera display for vehicles equipped with a backup camera, and on some models, a dual display screen operation.
Changing the Time Zone 1. Turn on the multimedia system. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. This is the worldwide standard for time. Setting the User Clock If you wish to set the clock to a time different from the system clock, you can manually adjust the time by Page Pressing and releasing the FF button will go forward five seconds of the current track.
If the left down button is pressed during the first two seconds of the current track, it will go back to the previous track in the list; List mode enables you to scroll through the list of menus and tracks on the iPod device. To exit the List mode without selecting a track, press the same preset button again to go back to Play mode. A CD may remain in the radio while in the Satellite radio mode. Satellite Antenna To ensure optimum reception, do not place items on the roof around the rooftop antenna location or strap items to the trunk lid around the trunk lid antenna if equipped.
To stop the search, press the SCAN button a second time. INFO Button — If a preset button is activated while in the Music Type Program Type mode, the Music Type mode will be exited and the radio will tune to the preset channel.
This allows a total of 12 Satellite channels to be stored into pushbutton memory. Do not apply paper, paper CD labels, or tape to the disc; avoid scratching a disc. Do not use solvents such as benzine, thinner, cleaners, or antistatic sprays. Store a disc in its case after playing. Page Blower Control Use this control to regulate the amount of air forced through the ven- tilation system in any mode. There are four blower speeds.
These outlets can be adjusted to direct airflow. The center instrument panel outlets can be NOTE: aimed so that they are directed toward the rear seat passengers for maximum airflow to the rear. This de- humidifies the air to help dry the windshield. To improve fuel economy, use these modes only when necessary. Then, move the temperature control to the desired temperature. Page cabin infrared sensor mounted between the sun-visors and from various sensors located throughout the vehicle.
The controls on the climate control provide the system with operator input. This indicates that the system is in AUTO mode and requesting the air conditioning is not necessary. Use this mode with maximum blower and temperature settings for best windshield and side window defrosting. Page Winter Operation Use of the air Recirculation mode during winter months is not recommended because it may cause window fogging. Vacation Storage Anytime you store your vehicle, or keep it out of service i.
Leaves collected in the air intake may reduce airflow, and if they enter the plenum, they could plug the water drains. In winter months, make sure the air intake is clear of ice, slush, and snow. Press this button to turn on the rear window defroster and the heated side mirrors if equipped.
Page Tread Wear Indicators Make sure all occupants have securely fastened their seat belts. Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons.
If the engine fails to start within 15 seconds, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the normal starting procedure. To prevent damage to the starter, do not crank the engine for more than 15 seconds at a time. Wait 10 to 15 seconds before trying again. After Starting The idle speed will automatically decrease as the engine warms up. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse.
This system is active only while the ignition switch is in the ON position. Always press the brake pedal first, before moving the gear selector out of PARK. The engine can be started and stopped, but the key cannot be removed until you obtain service. Shift into this range only after the vehicle has come to a complete stop. This is done to prevent transaxle damage due to overheating.
Reset Mode - Electronic Transaxle The transaxle is monitored electronically for abnormal conditions. AutoStick allows you to maximize engine braking, eliminate undesirable upshifts and downshifts, and im- prove overall vehicle performance.
This system can also provide you with more control during passing, city driving, cold slippery conditions, mountain driving, trailer towing, and many other situations. The transaxle will stay in the manually selected gear. All wheels must have the same size and type tires. Unequal tire sizes must not be used. Unequal tire size may cause failure of the power transfer unit. In the event power assist is lost for any reason i.
However, the effort required to brake the vehicle will be much greater than that required with the power system operating. Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to an accident. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or comes on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required.
These are all normal characteristics of ABS. The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. Whenever the vehicle is started the ESP system will be in this mode.
This mode should be used for almost all driving situa- tions. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. This phenomenon occurs when there is a difference in the surface traction under the front driving wheels.
Page Load Index a numerical code associated with the maximum load a tire can carry A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions i.
Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
Never overload them. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement.
Under inflation, also increases tire rolling resistance and results in higher fuel consump- tion. Page check tire pressure. Do not make a visual judgement when determining proper inflation.
Radial tires may look properly inflated even when they are under inflated. After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap if equipped. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important.
It is engineered to be used on your style vehicle only. Since this tire has limited tread life, the original tire should be repaired or replaced and rein- stalled at the first opportunity.
Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with the compact spare installed. Damage to the vehicle may result. Limited Use Spare — If Equipped The limited use spare tire is for temporary emergency use on your vehicle.
Prolonged use of limited use spare, or incorrect tire size of front wheel, may damage the transaxle differ- ential and result in loss of vehicle mobility and could result in loss of vehicle control. These indicators are molded into the bottom of the tread grooves. Page Replacement Tires Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease, and gasoline.
Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. Using a tire with a smaller load index could result in tire overloading and failure.
Damage to the vehicle may result if tire chains are used. Remember, more frequent rotation is permissible if desired. Also, correct for anything causing rapid or unusual wear prior to performing the tire rotation. Page pressure will also increase as the vehicle is driven - this is normal and there should be no adjustment for this increased pressure.
A system fault can occur due to any of the following: 1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors.
Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the Receiver Module. NOTE: It is particularly important for you to check the tire pressure in all of the tires on your vehicle monthly and to maintain the proper pressure. In addition, the Electronic Vehicle Information Center EVIC will display a graphic showing the pressure values of each tire with the low tire pressure values flashing.
Page turn off. Installing some form of aftermarket window tinting that affects radio wave signals. Lots of snow or ice around the wheels or wheel housings. Page General Information 5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically. In addition, the TPM Telltale Light will turn OFF and the graphic in the EVIC will display a new pressure value instead of dashes - - , as long no tire pressure is below the low-pressure warning limit in any of the four active road tires.
Page 3. Over 40 automobile manufacturers around the world have issued and endorsed consistent gasoline specifica- tions the World Wide Fuel Charter, WWFC which The manufacturer supports the use of reformulated gaso- lines.
Properly blended reformulated gasolines will pro- vide excellent performance and durability of engine and fuel system components. Gasoline blended with MMT reduces spark plug life and reduces emission system performance in some vehicles.
If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service. Contact your authorized dealer for service assistance. Page Flexible Fuel- 2. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. Page Ethanol Fuel E Along with the special E fuel filler cap, your vehicle may display a badge, which also indicates it can operate on E For best results, a refueling pattern that alternates be- tween E and unleaded gasoline should be avoided.
The gas cap is behind the fuel filler door, on the left rear quarter panel of the vehicle. This is in violation of most state and federal fire regula- tions and doing so will cause the malfunction indicator light to turn on. This includes driver, passengers, and cargo. The total load must be limited so that you do not exceed the GVWR.
Page Loading Figure out the weight on the front and rear of the vehicle separately. It is important that you distribute the load evenly over the front and rear axles. Overloading can cause potential safety hazards and shorten useful service life. Before towing a trailer, carefully review this information to tow your load as efficiently and safely as possible. Distribute the load over the front and rear axles evenly.
Make sure that you do not exceed either front or rear GAWR. It is important that you do not exceed the maximum front or rear GAWR. Frontal Area 2. M Refer to local laws for maximum trailer towing speeds. The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and it should never exceed the weight referenced on the Tire Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of vehicle and trailer.
Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the Tire and Loading Information placard in the Tire Safety Information Section of this manual for the maximum combined weight of occupants and cargo for your vehicle. Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and that it will not shift during travel.
When traile- ring cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. Page 4. If the trailer weighs more than 1, lbs kg loaded, it should have its own brakes with adequate braking capacity. The electrical connections are all complete to the vehicle, but you must mate the harness to a trailer connector. How- ever, if frequent shifting occurs while in this range, third gear for a four-speed automatic and the fifth gear for a six-speed AutoStick should be selected.
If you have any questions or concerns after reviewing this section, please consult your authorized dealer to for full details on the towing capabilities of the vehicle. Depress the switch and both cluster indicators and all front and rear direc- tional signals will flash. Depress the switch again to turn Hazard Warning Flashers off.
If your air conditioner is on, turn it off. Page Engine Oil Overheating 2. A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to Section 7, Maintenance, of this manual. Spare Tire Stowage The compact spare tire is stowed under the load floor in the trunk.
Spare Tire Removal Lift up the load floor cover and remove the hold down. Turn OFF the ignition. Do not attempt to change a tire on the side of the vehicle close to moving traffic. When the jack is partially expanded, the tension between the two attachment points holds the jack handle in place. Removing Jack Handle From Jack 2. There are two front jacking locations and two rear jacking locations on each side of the body as shown. Do not attempt to raise the vehicle by jacking on locations other than those indicated in step 3.
To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. Lower the vehicle by turning the jack screw to the left.
Finish tightening the nuts. Push down on the wrench while tightening the wheel nuts. Check the tire pressure as soon as possible.
Correct pressure as required. The battery is stored between the left front headlight assembly and the left front wheel splash shield. Page 1. Wear eye protection and remove any metal jewelry such as watchbands or bracelets that might make an inadvertent electrical contact. When boosting from a battery in another vehicle, park that vehicle within booster cable reach, but without allowing the vehicles to touch. Connect the other cable, first to the negative terminal of the booster battery and then to the engine ground - of the vehicle with the discharged battery.
Make sure you have a good contact on the engine ground. Refer to the following illustration for jump-starting connections. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between Reverse and First gear. Racing the engine or spinning the wheels too fast may lead to transaxle overheating and failure.
It can also damage the tires. Do not spin the wheels continu- ously for more than 30 seconds. A dolly should be used under the front wheels if the rear wheels are raised. Proper towing equipment is necessary to prevent dam- age to the vehicle. Page 2. This system monitors the performance of the emissions, engine, and automatic transaxle control systems.
When these systems are oper- ating properly, your vehicle will provide excellent per- formance and fuel economy, as well as maintaining engine emissions well within current government regu- lations. If the problem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the MIL. Page Replacement Parts 5.
Approximately 15 seconds later, one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition key or start the engine. Service manuals are available which include detailed service information for your vehicle. Refer to these service manuals before attempting any procedure yourself. Do not check oil level before starting the engine after it has sat overnight.
Checking engine oil level when the engine is cold will give you an incorrect reading. Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature.
This could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. This engine oil improves low temperature starting and vehicle fuel economy.
Your engine oil filler cap also shows the recommended engine oil viscosity for your vehicle. New plugs should be in- stalled at the specified mileage. The entire set should be replaced if there is any malfunction due to a faulty spark plug.
Comments
Post a Comment